Value Range
DIL: Distribution depends on the trunk through which the calls arrive
DDI/DID: Distribution depends on the DDI/DID number of the calls
MSN: Distribution depends on the MSN of the calls
Maintenance Console Location
12.2 [10-2] DIL Table & Port Settings
Programming Manual References
None
Feature Guide References
1.1.1.1 Incoming Trunk Call Features—SUMMARY
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
DDI/DID/TIE/MSN—Remove Digit
Specifies
the number of leading digits to be removed from the incoming called number for DDI/DID distribution
or for TIE line service.
Value Range
0–15
Maintenance Console Location
12.2 [10-2] DIL Table & Port Settings
Programming Manual References
None
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
1.30.1 TIE Line Service
DDI/DID/TIE/MSN—Additional Dial
Specifies the number to be added to the incoming called number in the place of the removed digits for DDI/
DID distribution or for TIE line service.
Value Range
Max. 8 digits (consisting of 0–9, *, and #)
906 PC Programming Manual
12.2 [10-2] DIL Table & Port Settings
To Next Page
Loading...
