Features After Setting
Call Waiting
*1
Enable (Call Waiting tone)
Data Line Security Off
Executive Busy Override Deny Allow
Log-in/Log-out Log-in
Message Waiting All messages left by other extensions will be
cleared.
Paging Deny Allow
Paralleled Telephone Paired SLT will ring.
Hot Line
*1
Off
Timed Reminder Cleared
*1
These features can be programmed to not be canceled by Extension Feature Clear.
This feature is also known as Station Program Clear.
Conditions
• Extension Dial Lock (
® 5.1.4 Extension Dial Lock) and the extension personal identification number (PIN)
(® 5.1.6 Extension PIN (Personal Identification Number)) will not be cleared by this feature.
• If dial tone 2 is heard after Extension Feature Clear:
After performing Extension Feature Clear, Call Waiting will be enabled if "Extension Clear: Call
Waiting" is set to "Clear" through system programming. In this case, dial tone 2 will be heard when
going off-hook. (® 4.1.4 Dial Tone)
PC Programming Manual References
4.9 [2-6-1] Numbering Plan—Main—Features—
Extension Feature Clear
4.18 [2-9] System Options—Option 2
→ Extension Clear—Call Waiting
→ Extension Clear—Fwd/DND
→ Extension Clear—Hot Line (Pickup Dial)
Operating Manual References
1.3.26 Extension Feature Clears
5.1.6 Extension PIN (Personal Identification Number)
Description
Each extension user
can be assigned a personal identification number (PIN) through system programming or
personal programming (Extension PIN [Personal Identification Number]). This PIN is used to set features or
access the extension remotely.
The following features require a valid PIN:
a. Live Call Screening (LCS)
*1
(® 19.1.4 Voice Mail DPT (Digital) Integration)
106 Feature Manual Document Version 2013-05
5.1.6 Extension PIN (Personal Identification Number)
To Next Page
Loading...
