6.1 F
6.1.1 Fixed Buttons
Description
Proprietary telephones (PTs), DSS Consoles, and Add-on Key Modules feature a wide variety of feature
buttons and Line Access buttons, explained below.
Note that certain models do not feature certain buttons.
For a description
of the buttons found on portable stations (PSs), please refer to the Operating Instructions for
each PS.
[PT and Add-on Key Module]
Button Usage
Navigator Key,
Jog Dial,
Volume Key
Used to adjust the volume of the ringer, speaker, handset and
headset, and also adjust the display contrast. The Navigator Key
and Jog Dial can
also be used to select data from the Call Directory
and the System Feature Access Menu on the display.
ENTER Used to confirm the selected item.
CANCEL Used to cancel the selected item.
PROGRAM
Used to enter and exit programming mode.
FLASH/RECALL
Used to disconnect the current call and make another call without
hanging up
(Flash/Recall mode or Terminate mode), or used to
send a flash/recall
signal to the telephone company or host PBX to
access external features (External Feature Access mode). This
button can also be used as a CANCEL button while on-hook.
HOLD
Used to place a call on hold.
SP-PHONE (Speakerphone)
Used for hands-free operation. Also used to switch between
handset and hands
-free operation.
MONITOR
Used for hands-free dialing. Also used to monitor the other party’s
voice in hands
-free mode.
MESSAGE
Used to leave a Message Waiting indication or call back the party
who left the Message Waiting indication.
REDIAL
Used to redial the last number dialed.
TRANSFER
Used to transfer a call to another party.
114 Feature Manual Document Version 2013-05
6.1.1 Fixed Buttons
To Next Page
Loading...
