Panasonic KX-NCP1000 - Page 202

Type Music Source
Incoming Intercom Calls/Outgoing
Calls
Selected based on the tenant setting to which the
extension user belongs.
Incoming CO Line Calls
Selected based on the tenant setting of the distribution
method (DIL/DID).
[Using OGMs for BGM]
• This feature will function using the preinstalled MPR card. To increase the number of music sources for
this feature, it is possible to add an ESVM4 card mounted on an OPB3 card. The MSG4 card is not
recommended for use with Music on Hold.
• To use OGMs for BGM, the corresponding ESVM card/block's SVM Feature must be disabled, and MSG
Feature (OGM) enabled.
• When an OGM is assigned to a BGM, the channel for that OGM becomes occupied and cannot be used
for other OGM features, even when no calling parties are listening to Music on Hold.
MPR Card
OGM Enabled/SVM Disabled
OPB3 Card OPB3 Card
OGM for BGM2
ESVM4 Card
OGM Enabled/SVM Disabled
OGM for BGM3
OGM for BGM4
ESVM4 Card
SVM Enabled/OGM Disabled
SVM Block 1
SVM Block 2
SVM
Block 1
SVM
Block 2
ESVM4 Card
SVM Enabled/OGM Enabled
Empty Slot
Empty Slot
Empty Slot
Only cards with
OGM Enabled and
SVM Disabled can
be used for Music on
Hold.
OGM
for other
features
OGM for
other features
OGM for
other features
Installation Manual References
KX-NCP500/KX-NCP1000
3.10.1 Connection of Peripherals
KX-TDE100/KX-TDE200
3.10.1 Connection of Peripherals
KX-TDE600
3.12.1 Connection of Peripherals
PC Programming Manual References
3.5 [1-1] Slot—OPB3 Card Property
202 Feature Manual Document Version 2013-05
11.1.4 Music on Hold