EasyManua.ls Logo

Panasonic KX-NCP1000 - Page 304

Panasonic KX-NCP1000
422 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.15 [2-8-1] Ring Tone Patterns—Call from CO
Incoming Doorphone Calls: each pattern plan can assign a ring tone pattern for each doorphone.
4.16 [2-8-2] Ring Tone Patterns—Call from Doorphone
Others: each pattern plan can assign a ring tone pattern for incoming intercom calls as well as ring tones
assigned to certain features (e.g., timed reminder).
4.17 [2-8-3] Ring Tone Patterns—Call from Others
The ring tone patterns that arrive at an extension are determined by the pattern plan that is assigned to that
extension through system programming.
[Programming Example of Ring Tone Pattern Table]
Table
No.
Intercom
Call/Hold
Recall
CO Line Call/
Hold Recall
Doorphone
Call Timed
Reminder
Call
Back
LCS
External
Sensor
TRG1 ... Port 1 ...
1 Double Single Single
2 Single Double Double
: : : : : : : : : :
Conditions
"PT Ring Off Setting
" can be enabled or disabled through system programming. If disabled, PT users
cannot turn incoming call ringing off for their extension.
For the S-CO, G-CO, L-CO, ICD Group, INTERCOM, PDN and SDN buttons, one of 30 ring tones can be
assigned through personal programming.
PC Programming Manual References
4.15 [2-8-1] Ring Tone Patterns—Call from CO—
Ring Tone Pattern Plan 1–8
4.16 [2-8-2] Ring Tone Patterns—Call from Doorphone— Ring Tone Pattern Plan 1–8
4.17 [2-8-3] Ring Tone Patterns—Call from Others— Extension—Ring Tone Pattern Plan 1–8
4.18 [2-9] System Options—Option 1— PT Operation—PT Ring Off Setting
6.1 [4-1-1] Wired Extension—Extension Settings
→Option 1— Ring Pattern Table
→Option 6— ICM Tone
6.5 [4-1-4] Wired
Extension—Flexible Button
Optional Parameter (Ringing Tone Type Number)
(for Loop
CO, Single CO, Group CO, G-DN, SDN)
6.10 [4-2-1] Portable Station—Extension Settings—Option 1—
Ring Pattern Table
6.18 [4-3] DSS
Console
Optional Parameter (Ringing Tone Type Number)
(for Loop CO, Single CO, Group
CO, G-DN, SDN)
Feature Manual References
21.1 Capacity of System Resources
Operating Manual References
3.1.4 Customizing the Buttons
304 Feature Manual Document Version 2013-05
15.1.2 Ring Tone Pattern Selection

Table of Contents

Other manuals for Panasonic KX-NCP1000

Related product manuals