Panasonic KX-NCP1000 - Message Waiting

1.3.43 Message Waiting
For an extension leaving a message waiting indication
When
the called extension is busy or does not answer your call, you can
leave a notification so that the called party may call you back.
For an extension receiving a message waiting indication
As a message receiver, the Message button light or Message/Ringer
Lamp lets you know that a call has been received. If you receive
notification, you can call back the caller by a simple operation.
Note
For
an extension receiving a message waiting indication, this feature
is not available for SIP extensions (except the KX-HGT100). For
KX-HGT100 users, refer to the Quick Reference Guide of the
KX-HGT100 for instructions.
For an extension leaving a message waiting indication
To leave a message waiting indication
PT/SLT/PS
Press MESSAGE
or enter 4.
On-hook.
When the called extension is busy or does not answer
OR
4
MESSAGE
C.Tone
To leave/cancel a message waiting indication
PT and SLT
PT/SLT/PS/SIP Extn.
Off-hook.
Enter 1 to leave
or 0 to cancel.
On-hook.
Enter desired
extension number.
Leave
Cancel
1
0
OR
07
Enter 70.
desired
extension no.
C.Tone
Document Version 2013-05 Operating Manual 105
1.3.43 Message Waiting