• For KX-NT560/KX-NT400/KX-NT300
series (except KX-NT321)/KX-DT343/KX-DT346
telephone users:
• With KX-NT560/KX-NT400/KX-NT300 series (except KX-NT321)/KX-DT343/KX-DT346
telephones, you can use a Bluetooth wireless headset registered on your extension as
a headset.
• Operating Distance
Please keep the telephones with connected Bluetooth Modules, 3 m (9 ft 10 in) or more
apart from each other. Also, if a Bluetooth headset is in use near a telephone with a
connected Bluetooth Module, other than the one it is registered to, noise may be heard.
Move away from the telephone and closer to the one it is registered to, to improve the
signal.
• Noise
Signals are transmitted between this module and the Bluetooth headset using radio
waves. For maximum distance and noise free operation, it is recommended that the
module is situated away from electrical appliances such as faxes, radios, PCs, or
microwaves.
– Systems using the 2.4 GHz ISM (Industrial, Scientific and Medical) band may interfere
with this product. Examples of such systems are cordless telephones, wireless LAN,
Home RF, microwave ovens and other ISM devices. These systems may cause minor
noise.
• For KX-NT500 series telephones users:
• With KX-NT500 series telephones, you can use a Electric Hook Switch (EHS)
Headsets. For the latest information about headsets that have been tested with this
unit, consult your dealer.
Customizing Your Phone
• 3.1.2 Personal Programming
—
Headset Operation
Select the equipment to use.
• 3.1.4 Customizing the Buttons
Create or edit a Headset button.
Answer/Release Button
Customized Answer and Release buttons can make using a headset much easier. You can
answer incoming calls or disconnect the line with these buttons.
Some DSS Consoles have fixed ANSWER and RELEASE buttons.
To answer
Press Answer.
Talk.
PT
(Answer)
92 Operating Manual Document Version 2013-05
1.3.33 Headset Operation
To Next Page
Loading...
