IP Address Information
Either 1 or 2 IP addresses must be assigned to each DSP card, depending on the type of DSP card. You can
assign IP addresses to the DSP cards during Easy Setup Wizard or through system programming.
For details about Easy Setup Wizard, refer to "5.4.1 Easy Setup Wizard".
For details about assigning IP addresses through System Programming, refer to "Changing IP Address
Settings".
DSP Card Type Number of IP Addresses
DSP S/DSP M 1
DSP L 2
112 Installation Manual Document Version 2016-03
4.3.3 DSP Cards
To Next Page
Loading...
Need help?
General