Panasonic KX-NS Series Installation Manual

KX-NT321/KX-NT551
Press PROGRAM
while "Searching" is displayed.
To start programming
Supply power to the IP-PT.
To enter the IP address of the PBX
To the VLAN settings
The IP-PT will reboot
and can then be
registered to the PBX.
To end programming
To set VLAN parameters
OR
Press HOLD twice to return
to the Menu screen.
Select "PBX IP
Address".
Press SP-PHONE.
Press SP-PHONE.
Press STORE.
Select "PBX". Press SP-PHONE.
Press SP-PHONE.
Select "Primary
PBX".
Press SP-PHONE.
Select "Secondary
PBX".
Press SP-PHONE.
To enter the IP address of the Secondary PBX (if required)
PBX IP Address
PBX IP Address
Note
• To confirm the connection to the secondary PBX after assigning IP addressing information, (1) turn
the IP-PT’s power off, and (2) hold the STORE button and 2 key while turning the power on.
Document Version 2016-03 Installation Manual 185
5.7.1 Assigning IP Addressing Information

Panasonic KX-NS Series Specifications

General

Brand	Panasonic
Model	KX-NS Series
Category	PBX
Language	English