Features After Setting
Absent Message Off
BGM Off
FWD
*1
/DND
*1
Off
Call Pickup Deny Allow
Call Waiting
*1
Enable (Call Waiting tone)
Data Line Security Off
Executive Busy Override Deny Allow
Log-in/Log-out Log-in
Message Waiting All messages left by other extensions will be
cleared.
Paging Deny Allow
Hot Line
*1
Off
Timed Reminder Cleared
*1
These features can be programmed to not be canceled by Extension Feature Clear.
This feature is also known as Station Program Clear.
Conditions
• Extension
Dial Lock (® 6.1.8 Extension Dial Lock) and the extension personal identification number (PIN)
(® 6.1.10 Extension PIN (Personal Identification Number)) will not be cleared by this feature.
• If dial tone 2 is heard after Extension Feature Clear:
After performing Extension Feature Clear, Call Waiting will be enabled if "Extension Clear: Call
Waiting" is set to "Clear" through system programming. In this case, dial tone 2 will be heard when
going off-hook. (® 5.1.5 Dial Tone)
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
Extension Feature Clear
10.9 PBX Configuration
—[2-9] System—System Options—Option 2
→
Extension Clear—Call Waiting
→ Extension Clear—Fwd/DND
→ Extension Clear—Hot Line (Pick-up Dial)
Operating Manual References
1.3.26 Extension Feature Clear
132 Feature Manual Document Version 2016-03
6.1.9 Extension Feature Clear
To Next Page
Loading...
