Light Pattern Calls in the Waiting Queue
Red on At or under the assigned number for Hurry-up
Rapid red flashing Over the assigned number for Hurry-up
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan
—Main—Features—
Incoming Call Queue
Monitor
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings
→Overflow Queuing Busy
→Overflow No Answer
→Queuing Time Table
→Miscellaneous— Extension No Answer Redirection Time
→Miscellaneous— Maximum No. of Busy Extension
11.5.2 PBX Configuration—[3-5-2] Group—Incoming Call Distribution Group—Queuing Time Table
11.7.1 PBX Configuration—[3-7-1] Group—UM Group—System Settings— Call Waiting on VM Group
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
→ Type
→ Extension Number (for Hurry-up)
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
→ Type
→ Extension Number (for Hurry-up)
Feature Manual References
7.1.3 Flexible Buttons
10.1.5 ICD Group Features—Overflow
14.1.2 OGM (Outgoing Message)
23.1 Capacity of System Resources
Operating Manual References
1.3.41 ICD Group Features—Manual Queue Redirection
10.1.7 ICD Group Features—Supervisory
Description
An extension preprogrammed as a supervisor (supervisor extension) can monitor and control each member’s
status within the incoming call distribution group using a 6-line display PT.
Feature Description
Incoming Call Queue Monitor The supervisor extension can monitor the status of an incoming
call distribution group with the display.
Document Version 2016-03 Feature Manual 189
10.1.7 ICD Group Features—Supervisory
To Next Page
Loading...
