Panasonic KX-NS1000 - Page 214

Service Description Details in
Caller ID The PBX receives Caller ID information, such as
the caller
’s name and telephone number, when a
call is sent from the network. A display proprietary
telephone (PT) user can see this information
before answering the call.
® 4.1.3 Caller ID
3. Private Networking Connection (QSIG)
Private
networking with QSIG is possible using an ISDN line. Each ISDN port must be programmed so that
each ISDN line has a "master" connection and a "slave" connection.
Conditions
• En bloc
The PBX sends all of dialed digits at once after the extension user completes dialing. The PBX recognizes
the end of dialing as follows:
– the # key is pressed (programmable).
10.9 PBX Configuration—[2-9] System—System Options—Option 2—
ISDN en Bloc Dial—[#] as
End of Dial for en Bloc mode
– the dialed number is a preprogrammed telephone number.
11.1.4 PBX Configuration—[3-1-4] Group
—Trunk Group—Dialing Plan
– the inter-digit timer expires.
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone—
Dial—Extension Inter-digit
• Extension Number
An extension number can be assigned to each ISDN port.
12.1.1
PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main—
Extension
Number
• Network Type
Each ISDN port can be set to the requirements of each country/area.
• L1 Active Mode and L2 Data Link Mode
The active mode of Layer 1 (L1) and the data link mode of Layer 2
(L2) can be selected individually
(Permanent or Call by Call) for each ISDN port.
• TEI Assignment Mode
The Terminal Endpoint Identifier (TEI) assignment mode can be selected for each ISDN port.
• Bearer Mode
The bearer mode can be assigned for each ISDN port.
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 7—
ISDN
Bearer
12.2.1
PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 7—
ISDN
Bearer
PC Programming Manual References
9.26 PBX Configuration
—[1-1] Configuration—Slot—Card Property - PRI type
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone—
Dial—Extension
Inter-digit
10.9 PBX Configuration
—[2-9] System—System Options—Option 2—
ISDN en Bloc Dial—[#] as End of
Dial for en Bloc mode
11.1.4.1 PBX Configuration—[3-1-4] Group
—Dialing Plan—Auto Assign
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
214 Feature Manual Document Version 2016-03
10.1.18 ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES