Panasonic KX-NS1000 - 2.1.1.3 Direct Inward Dialling (DID);Direct Dialling In (DDI)

® 16.5 PBX Configuration—[8-5] ARS—Carrier
—Carrier—
CLIP Table No.
[Command Explanation]
Command
Description
Inserts the Carrier Access Code
Inserts the user-dialed number minus any removed digits
Analog Line: Inserts a pause
ISDN/T1 Line: Inserts a pause and changes dialing mode to tone (DTMF)
Inserts the Authorization Code for Tenant
Inserts the Authorization Code for Trunk Group
Inserts the Itemized Billing Code
You can enter any of these digits in a modify command
C
H
P
A
G
I
[0–9, , #]
[Programming Example: Carrier Table]
In this example
Dialed number: 9-1-212-555-5555
Modification:
9 1 2125555555 0880 2125555555
Remove 1 digit Add the Carrier Access Code
CO Line Access no. is ignored
Carrier A
1, 2, 3
0880
1
CH
2
Carrier Name
*1
Trunk Group
*2
Carrier Access Code
*3
Removed No. of Digits
*4
Modify Command
*5
Carrier J
4
0700
3
CPH
1
Carrier 1 Carrier 2
CLIP Table No.
0123456789
0234567861
0356894526
:
0856325889
1
2
3
8
CLIP No.
Ext. 1001
CLIP
CLIP: 0234567861
*1
® 16.5 PBX Configuration—[8-5] ARS—Carrier
—Carrier—
Carrier Name
*2
® 16.5 PBX Configuration—[8-5] ARS—Carrier
—TRG 01–TRG 96
*3
® 16.5 PBX Configuration—[8-5] ARS—Carrier—Carrier—
Carrier Access Code
*4
® 16.5 PBX Configuration—[8-5] ARS—Carrier
—Carrier—
Removed Number of Digits
*5
® 16.5 PBX Configuration—[8-5] ARS—Carrier
—Carrier—
Modify Command
Note
• If
the ARS Itemized Code is set to be sent as a CLIP with ARS, the following settings are prioritized
and used as the CLIP.
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option
1—
ARS Itemized Code
12.2.1 PBX Configuration—[4-2-1] Extension
—Portable Station—Extension Settings—Option
1—
ARS Itemized Code
26 Feature Manual Document Version 2016-03
2.1.3 ARS (Automatic Route Selection)