a. Extension Number Method (Access without PBX Code)
Dial the [Extension Number] only.
[Example]
PBX-1
TIE Line
PBX-2
Interface InterfaceInterface
Extn. 2011
PBX-3
Extn. 3011
Extn.1011 Extn.1012
Dials "3011". Dials "2011".
TIE Line
Interface
Explanation:
To
use this method, it is necessary to change the first one or two digits of extension numbers of either PBX
(e.g., 10XX for PBX-1, 20XX for PBX-2) to allow calls to be routed properly.
Case 1:
Extension 1012 of PBX-1 dials extension number "2011".
® Extension 1012 of PBX-1 is connected to extension 2011 of PBX-2.
Case 2:
Extension 1011 of PBX-1 dials extension number "3011".
® Extension 1011 of PBX-1 is connected to extension 3011 of PBX-3.
b. PBX Code Method (Access with PBX Code)
Dial the [TIE Line Access Number] + [PBX Code] + [Extension Number].
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
TIE Line Access
17.1 PBX Configuration
—[9-1] Private Network—TIE Table—
Own PBX Code
Document Version 2016-03 Feature Manual 271
15.1.12 PRIVATE NETWORK FEATURES
To Next Page
Loading...
