16.1 Q
16.1.1 Quick Dialing
Description
An
extension user can make a call or access a feature easily. This is enabled by storing the number (extension
number, telephone number, or feature number etc.) for Quick Dialing.
Quick Dialing is convenient in situations such as the following:
– Room service calls in a hotel
– Calling your company’s headquarters via the public network. Extension users can think of the Quick Dialing
number as an extension number.
[Programming Example: Quick Dialing]
Location No. Quick Dialing No. Desired Number
Quick Dialing 01
Quick Dialing 02
Quick Dialing 03
110
5
2011
9110 (CO Line Call)
3016 (Room Service)
90123456789 (Headquarters)
Conditions
• Quick Dialing numbers follow the flexible numbering plan.
(® 7.1.4 Flexible Numbering/Fixed Numbering
)
• It is possible to use Quick Dialing to make a CO line call via an extension at another site in a One-look
network when the PBX is in Break mode (® 19.1.3 Time Service). System programming at each site is
required to enable this feature. This feature is not available when calling extensions at your own site. For
details about the programming for each site, refer to the PC Programming Manual (® 10.6.2 PBX
Configuration—[2-6-2] System—Numbering Plan—Quick Dial—
Use Quick Dial for CO rerouting during
"Break" Mode.).
PC Programming Manual References
10.6.2 PBX Configuration—[2-6-2] System—Numbering Plan
—Quick Dial
Feature Manual References
19.1.3 Time Service
23.1 Capacity of System Resources
Operating Manual References
1.3.59 Quick Dialing
332 Feature Manual Document Version 2016-03
16.1.1 Quick Dialing
To Next Page
Loading...
