EasyManua.ls Logo

Panasonic KX-NS1000 - 4.3.1.3 TIE Line Programming

Panasonic KX-NS1000
482 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[Visualization of Time Schedule for Tenant 1]
Time Table No. 1
09:0006:00 12:00 15:00 18:00 21:00 00:0000:00 03:00
Night NightDay 1 Day 2 Break 1Lunch
Monday Tuesday
Note that in this example, the day mode (Day 2) resumes automatically when the break mode (Break 1)
ends.
[Visualization of Time Schedule for Other Tenants]
Time Table No. 2
Time Table No. 3
Time Table No. 4
09:0006:00 12:00 15:00 18:00 21:00 00:0000:00
Monday
03:00
NightDay BreakLunch
Tuesday
Note that time modes can be arranged as they are needed (for example, night mode can occur in the
morning and afternoon, if necessary) and not all time modes need to be used in a tenant’s time schedule.
3. Features Using Time Service
The following features can be programmed separately for each time mode:
a. Destination of incoming CO line calls (Direct In Line (DIL)/Direct Inward Dialing (DID)) (® 5.1.8 DIL
(Direct In Line), ® 5.1.7 DID (Direct Inward Dialing))
b. Destination of calls handled by Intercept Routing (® 10.1.12 Intercept Routing)
c. Destination of calls that are overflowed while waiting in a queue for an available agent of an incoming
call distribution (ICD) group (® 10.1.5 ICD Group Features—Overflow)
d. Destination of incoming doorphone calls (® 5.1.15 Doorphone Call)
e. Destination of Operator Calls (® 14.1.9 Operator Features)
f. Toll Restriction (TRS) level of each COS
g. COS numbers which are permitted/restricted to access certain trunk groups (External Call Block) (®
4.1.16 CO Line Access)
h. Outgoing Message (OGM) for Timed Reminder (® 19.1.4 Timed Reminder)
i. Queuing Time Table used by an ICD group (® 10.1.6 ICD Group Features—Queuing)
j. Intercept time for Intercept Routing—No Answer (® 10.1.12 Intercept Routing)
k. Intercept time for DISA Intercept Routing—No Answer (® 5.1.10 DISA (Direct Inward System
Access))
l. Service group settings for voice mail (® 20.1.78 Unified Messaging—Service Group)
The following feature works only when the time mode is set to "break":
a. Using quick dialing to reroute a One-look network intercom call to a CO line during break mode
(® 16.1.1 Quick Dialing)
Document Version 2016-03 Feature Manual 373
19.1.3 Time Service

Table of Contents

Other manuals for Panasonic KX-NS1000

Related product manuals