EasyManua.ls Logo

Panasonic KX-NS1000 - Page 389

Panasonic KX-NS1000
482 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Connecting to the Unified Messaging system (including using features such as Two-way Recording)
requires a certain number of DSP resources. If all DSP resources are in use, this operation cannot be
performed. To ensure a minimum level of performance, DSP resources can be reserved for Unified
Messaging operations.
(® 5.1.18 DSP Resource Usage)
Notice
Reserving resources for Two
-way Recording (® 20.1.9 Unified Messaging—Automatic Two-way
Recording for Manager, ® 20.1.90 Unified MessagingTwo-way Record/Two-way Transfer) reserves
the necessary number of UM ports exclusively for Two-way Recording. For example, if 2 UM ports (the
default) are available and you reserve resources for 2 Two-way Recording sessions, both UM ports
will be reserved for Two-way Recording, and the Unified Messaging system will not be available for
other uses.
Reserved (Two-way) Reserved (Two-way)
UM Group
UM
Port 1
UM
Port 2
Two-way Recording Incoming Call
To provide access to the Unified Messaging system in this case, either the number of UM ports must
be increased or the number of resources reserved for Two
-way Recording must be lowered.
Installing KX-NSU102 or KX-NSU104 (Unified Messaging Activation Key) increases the number of
available UM ports at a PBX (maximum: 30). In a One-look network, these keys are required at each PBX
whose number of UM ports is to be increased. For the number of available UM ports of other KX-NS series
PBXs (e.g., KX-NS700) connected to a One-look network as Slave units, refer to the corresponding
manuals.
Installation Manual References
4.3.2 Storage Memory Card (installed by default), Storage Memory S Card (KX-NS0135), Storage Memory
M Card (KX-NS0136), Storage Memory L Card (KX-NS0137)
5.10 Configuration of Users
PC Programming Manual References
9.7 PBX Configuration—[1-1] Configuration—Slot—UM Port Property
10.5 PBX Configuration—[2-5] System—Holiday Table
10.9 PBX Configuration—[2-9] System—System Options—Option 9
11.7 PBX Configuration—[3-7] Group—UM Group
23.4 UM Configuration—[4-4] Service Settings—Holiday Table
Operating Manual References
1.6 Unified Messaging Features
Document Version 2016-03 Feature Manual 389
20.1.2 UNIFIED MESSAGING FEATURES

Table of Contents

Other manuals for Panasonic KX-NS1000

Related product manuals