When performing Walking Extension with this feature enabled, if you want to move your location permanently,
you must return your extension to its home location before moving.
When
performing Enhanced Walking Extension with this feature enabled, the extension will return to its home
location when the status is changed to Service-out mode.
[Example]
Service-out Service-in
<Disable: Location Switch>
Extn. 101 Extn. 102 Extn. 102
Location 1
Service-out Extn. 101 Service-inExtn. 101 Service-in Extn. 101 Service-out
Extn. 102 Extn. 101 Extn. 101
Location 2
Explanation:
When
an extension user enters Service-in mode at a location other than the home location, the location of the
extensions are switched.
This can be confusing for the user of the switched extension because the location of his/her extension may be
unknown.
<Enable: Return to the home location>
Extn. 101 Extn. 102 Extn. 101
Location 1
Home Location
Service-out
Extn. 101 Service-in
Extn. 101 Service-in Extn. 101 Service-out
Extn. 102 Extn. 101 Extn. 102
Location 2
Explanation:
When
an extension user enters Service-in mode at a location other than the home location, the location of the
extensions are switched temporarily, and returned to their home locations when the extension enters
Service-out mode. This makes it easier for both extension users to locate their extensions.
Conditions
• The usage conditions depend on the individual conditions for the Walking Extension and Enhanced Walking
Extension features.
• The location of an extension when this setting is enabled becomes its home location.
454 Feature Manual Document Version 2016-03
22.1.4 Walking Extension-Home position control
To Next Page
Loading...
