[Example]
CTI Server
PC
PC
LAN
LAN
PBX
Mother
Board
Conditions
• CTI application software must be installed on the connected PC. In addition,
KX-NSF101 (Activation Key
for CTI interface) is required to use CTI applications other than CA. In a One-look network, the activation
key is required only for the Master unit.
• CTI support for SIP extensions is available only for KX-UT series SIP phones.
• Application Programming Interface (API)/Protocol
Type API/Protocol
Third Party Call Control
• ECMA CSTA Phase 3
• TAPI 2.1
• Only one CTI server can connect to the PBX at a time.
• For details about specific CTI features, refer to the manual for your CTI application software.
• When using a Panasonic TSP, refer to "Before Installing
" in the KX-series TSP Installation Manual.
Installation Manual References
4.10 Connection of Peripherals
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
Dial Information (CTI)
10.9 PBX Configuration
—[2-9] System—System Options—Option 6 (CTI)
88 Feature Manual Document Version 2016-03
4.1.24 CTI (Computer Telephony Integration)
To Next Page
Loading...
