Panasonic KX-NS1000 - Page 45

• For KX-UT series
SIP phones, changes to the ring tone pattern are applied after the telephone is restarted.
• For the One-numbered Extension feature, the ring tone pattern for the main extension and the sub
extension can be set individually. (® 2.11.10 One-numbered Extension)
PC Programming Manual References
10.8.1 PBX Configuration—[2-8-1] System—Ring Tone Patterns—Call from CO—
Ring Tone Pattern Plan
1–8
10.8.2 PBX Configuration—[2-8-2] System—Ring Tone Patterns
—Call from DOORPHONE—
Ring Tone
Pattern Plan 1–8
10.8.3
PBX Configuration—[2-8-3] System—Ring Tone Patterns—Call from Others—
Extension—Ring
Tone
Pattern Plan 1–8
10.9 PBX Configuration
—[2-9] System—System Options—Option 1—
PT Operation—PT Ring Off Setting
12.1.1 PBX Configuration—[4-1-1] Extension
—Wired Extension—Extension Settings
→Option 1—
Ring Pattern Table
→Option 6— ICM Tone
12.1.4 PBX Configuration—[4-1-4] Extension
—Wired Extension—Flexible Button
—
Optional Parameter
(Ringing Tone Type Number)
(for Loop CO, Single CO, Group CO, ICD Group, SDN)
12.2.1 PBX Configuration—[4-2-1] Extension
—Portable Station—Extension Settings—Option 1—
Ring
Pattern Table
Feature Guide References
6.1 Capacity of System Resources
User Manual References
3.1.3 Customising the Buttons—To specify the ringing tones for each CO, ICD Group, PDN, SDN, or
INTERCOM button (DPT/IP-PT only)
Feature Guide 45
2.1.3 Incoming Call Indication Features