Panasonic KX-NS1000 - 5.5.3 PT Programming

– KX-TCA275
– KX-TCA285
– KX-TCA355
– KX-TCA385
– KX-TCA364
– KX-WT125
S-PSs cannot
be assigned to a PS ring group. For details about S-PSs, see "5.2.2.2 SIP Portable Station
(S-PS) and SIP Cell Station (SIP-CS)".
• Incoming trunk call information is shown on a PS display when a trunk call arrives at a PS ring group which
the PS joins. The display information can be selected on a PS ring group basis through system
programming: Called Party’s Name/Number or Caller’s Name/Number.
• Calling Multiple PSs Simultaneously
There are two methods to call multiple PSs simultaneously using the floating extension number assigned
to the following groups:
Method Assignment Merit Demerit
Incoming Call
Distribution Group
Assign all desired PSs to
one incoming call
distribution group, and set
the group call distribution
method for the group to
"Ring".
® 2.2.2 Incoming Call
Distribution Group
Features
All PS users in the
group can use the
Log-in/Log-out
feature, Wrap-up
feature, and ICD
Group button for the
group.
The CS may often be
busy as each PS in
the group uses one
channel when a call
arrives at the group.
PS Ring Group Assign all desired PSs to
one PS ring group.
Only one channel is
used when a call
arrives at the group.
PS users in the group
cannot use the
Log-in/Log-out and
Wrap-up features.
• When a PS joins a PS ring group, the following personal settings are disregarded:
a. When the PS ring group is called:
– Delayed Ringing
– Display information when the incoming calls arrive;
The settings (e.g., display priority) are disregarded.
– The setting which is assigned on the PS
(e.g., FWD)
– The status of the PS (e.g., busy)
b. Log-in/log
-out setting (from the PS ring group/from the incoming call distribution group which the PS
ring group belongs to). (® 2.2.2.7 Log-in/Log-out)
Feature Guide 475
5.2.4 Portable Station (PS) Features