Panasonic KX-NS1000 - Page 1032

Default
6 s
Value Range
1–10 s
Maintenance Console Location
23.3.5 UM Configuration
—[4-3] Service Settings—Custom Service—Password
Feature Manual References
20.1.27 Unified Messaging—Custom Service
Maximum Number of Invalid Entry (1-10)
Specifies the number of times an invalid password is entered before the operation assigned for Entry
Failure is executed.
Default
3
Value Range
1–10 times
Maintenance Console Location
23.3.5 UM Configuration
—[4-3] Service Settings—Custom Service—Password
Feature Manual References
20.1.27 Unified Messaging—Custom Service
No DTMF Input Operation
Determines
how calls are handled when callers do not dial any numbers in response to system guidance (often
because they are rotary telephone users). The default setting is "Operator", which allows the caller to be
automatically connected to an operator after the message is played.
Default
Operator
Value Range
Trf to Mbx, Trf to Ext, Operator, Trf to Out, Exit, Prev Menu, Cust Serv, Fax Service (see 23.3.1 UM
Configuration—[4-3] Service Settings—Custom Service—Menu & Transfer—
No DTMF Input
Operation)
Maintenance Console Location
23.3.5 UM Configuration
—[4-3] Service Settings—Custom Service—Password
1032 PC Programming Manual Document Version 2016-03
23.3.5 UM Configuration—[4-3] Service Settings—Custom Service—Password