Panasonic KX-NS1000 - Page 1033

Feature Manual References
20.1.27 Unified Messaging—Custom Service
Entry Failure
Determines what operation is activated when a caller enters an invalid password X times.
(X= the value set
for
Maximum Number of Invalid Entry (1-10))
Default
Exit
Value Range
Trf to Mbx, Trf to Ext
, Operator, Trf to Out, Exit, Prev Menu, Cust Serv, VM Serv, Call Trf Serv, Subscr Serv,
Dial by Name, Repeat Menu, Main Menu, Trf to Fax Extn, List All Names, Fax Service (see 23.3.1 UM
Configuration—[4-3] Service Settings—Custom Service—Menu & Transfer—
Key – Assigned
Operation: 0–9, *, #)
Maintenance Console Location
23.3.5 UM Configuration
—[4-3] Service Settings—Custom Service—Password
Feature Manual References
20.1.27 Unified Messaging—Custom Service
Pass1–5, Cancel
Pass1–5:
Specifies a password and an operation for the specified password.
Cancel:
Determines the operation that is activated when a caller presses
"#" to cancel password entry.
Default
None
Value Range
Pass1–5:
Password: Max. 12 digits
Assigned Operation: Trf to Mbx, Trf to Ext, Operator, Trf to Out, Exit, Prev Menu, Cust Serv, VM Serv, Call Trf
Serv, Subscr Serv, Dial by Name, Repeat Menu, Main Menu, Trf to Fax Extn, List All Names, Fax Service,
None (see 23.3.1 UM Configuration—[4-3] Service Settings—Custom Service—Menu & Transfer—
Key – Assigned Operation: 0–9, *, #)
Cancel:
Assigned Operation
: Trf to Mbx, Trf to Ext, Operator, Trf to Out, Exit, Prev Menu, Cust Serv, VM Serv, Call Trf
Serv, Subscr Serv, Dial by Name, Repeat Menu, Main Menu, Trf to Fax Extn, List All Names, Fax Service,
None (see 23.3.1 UM Configuration—[4-3] Service Settings—Custom Service—Menu & Transfer—
Key – Assigned Operation: 0–9, *, #)
Document Version 2016-03 PC Programming Manual 1033
23.3.5 UM Configuration—[4-3] Service Settings—Custom Service—Password