Panasonic KX-NS1000 - Page 1037

Value Range
Month and Day
Maintenance Console Location
23.4 UM Configuration
—[4-4] Service Settings—Holiday Table
Feature Manual References
20.1.43 Unified Messaging—Holiday Service
PC Programming Manual References
10.5 PBX Configuration—[2-5] System—Holiday Table
→
Holiday Table—End Date—Month
→ Holiday Table—End Date—Day
End Time
Specifies
the time of day on the specified date at which to end the holiday service. Click the cell to display an
array of hours and minutes. Select an hour of the day and a minute of the hour to set the time.
Default
Not stored
Value Range
Hour and Minute
Maintenance Console Location
23.4 UM Configuration—[4-4] Service Settings—Holiday Table
Feature Manual References
20.1.43 Unified Messaging—Holiday Service
Retain Holiday
If "Yes"
is selected, the holiday will not end regardless of the end time setting. To end the holiday setting when
"Yes" is selected and the end time has already passed, set
Setting to
"Disable" or re-program the settings
for the holiday.
Default
No
Value Range
No, Yes
Maintenance Console Location
23.4 UM Configuration—[4-4] Service Settings—Holiday Table
Document Version 2016-03 PC Programming Manual 1037
23.4 UM Configuration—[4-4] Service Settings—Holiday Table