Panasonic KX-NS1000 - Page 1087

Login Failures before Disconnection (1-99 times)
Specifies the number of times an invalid password can be entered before the system disconnects the call. In
order to use this feature,
Enable Login Failure Disconnection must be set to "Enable".
Default
3 times
Value Range
1–99 times
Maintenance Console Location
26.1 UM Configuration
—[7] System Security—Subscriber
Default Password for New Mailboxes
Specifies whether the default password is assigned to new mailboxes automatically when they are created.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
26.1 UM Configuration
—[7] System Security—Subscriber
Feature Manual References
20.1.84 Unified Messaging—System Security
Default Password—Fix digit (which length is minimum password length)
Select
this option to specify a fixed password for all new mailboxes. The number of digits in the password must
be equal or greater than the value specified in
Minimum Password Length (0-16 digits).
Default
1111
Value Range
Max. 16 digits
Maintenance Console Location
26.1 UM Configuration
—[7] System Security—Subscriber
Default Password—Prefix (1 or 2 digits) + Mailbox No
Select this option to specify default mailbox passwords using a prefix pattern. The value entered here will be
combined
with the mailbox number to become the default password. For example, if "55" is entered here, and
then mailbox 101 is created, its default password will be "55101". 1 digit or 2 digits can be used as the prefix.
Document Version 2016-03 PC Programming Manual 1087
26.1 UM Configuration—[7] System Security