Panasonic KX-NS1000 - Router Configuration-Setup-[1-2-2] WAN-Network Monitor

27.2.2 Router Configuration—Setup—[1-2-2] WAN—Network
Monitor
This screen is used to configure the network monitoring functions for the WAN.
Network Monitor (Basic)
ICMP Keep-Alive Enabled
Specifies whether to keep the PPPoE connection alive automatically by using ICMP echo mechanism.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
27.2.2 Router Configuration
—Setup—[1-2-2] WAN—Network Monitor
Destination IP Address
Specifies the destination IP address for ICMP echo requests.
If Disable is selected for ICMP Keep-Alive Enabled, this setting cannot be specified.
Default
Not stored
Value Range
1.0.0.1–223.255.255.254
Maintenance Console Location
27.2.2 Router Configuration
—Setup—[1-2-2] WAN—Network Monitor
Advanced Setting
Click here to open the advanced setting menu for Network Monitor (Advanced).
Maintenance Console Location
27.2.2 Router Configuration—Setup—[1-2-2] WAN—Network Monitor
Network Monitor (Advanced)
ICMP Keep-Alive Enabled
Specifies whether to keep the PPPoE connection alive automatically by using the ICMP echo mechanism.
Default
Disable
1112 PC Programming Manual Document Version 2016-03
27.2.2 Router Configuration—Setup—[1-2-2] WAN—Network Monitor