Panasonic KX-NS1000 - Page 1113

Value Range
Enable, Disable
Maintenance Console Location
27.2.2 Router Configuration
—Setup—[1-2-2] WAN—Network Monitor
Destination IP Address
Specifies the destination IP address for ICMP echo requests.
If Disable is selected for
ICMP Keep-Alive Enabled, this setting cannot be specified.
Default
Not stored
Value Range
1.0.0.1–223.255.255.254
Maintenance Console Location
27.2.2 Router Configuration
—Setup—[1-2-2] WAN—Network Monitor
Interval (s)
Specifies the interval of the polling timer used for sending ICMP echo requests.
Default
30
Value Range
1–3600 s
Maintenance Console Location
27.2.2 Router Configuration
—Setup—[1-2-2] WAN—Network Monitor
Fail Count
Specifies the maximum count of ICMP echo failures.
If Disable is selected for ICMP Keep-Alive Enabled, this setting cannot be specified.
Default
2
Value Range
1–255
Maintenance Console Location
27.2.2 Router Configuration
—Setup—[1-2-2] WAN—Network Monitor
Document Version 2016-03 PC Programming Manual 1113
27.2.2 Router Configuration—Setup—[1-2-2] WAN—Network Monitor