Panasonic KX-NS1000 - Router Configuration-Setup-[1-2-3] WAN-Protocol Bridge

27.2.3 Router Configuration—Setup—[1-2-3] WAN—Protocol
Bridge
IPv6 Bridge
Selects whether or not to enable IPv6 Pass Through.
If the IPv6 function is enabled, this setting is disabled.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
27.2.3 Router Configuration
—Setup—[1-2-3] WAN—Protocol Bridge
PPPoE Bridge
Select whether or not to enable PPPoE Bridge.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
27.2.3 Router Configuration
—Setup—[1-2-3] WAN—Protocol Bridge
Document Version 2016-03 PC Programming Manual 1115
27.2.3 Router Configuration—Setup—[1-2-3] WAN—Protocol Bridge