27.4 Router Configuration—Setup—[1-4] Routing
Routing
Selects whether to enable static routing.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
27.4 Router Configuration
—Setup—[1-4] Routing
Destination IP Address
Specifies the IP address of the destination host or network.
Default
Blank
Value Range
Blank, 1.0.0.0–223.255.255.255
Maintenance Console Location
27.4 Router Configuration
—Setup—[1-4] Routing
Netmask
Specifies the netmask for the Destination IP Address.
Default
Blank
Value Range
Blank, 0–255.0–
255.0–255.0–255 (except 0.0.0.0)
Maintenance Console Location
27.4 Router Configuration—Setup—[1-4] Routing
Interface or Gateway
Selects the method of specifying the Destination IP Address.
Default
Gateway
Document Version 2016-03 PC Programming Manual 1129
27.4 Router Configuration—Setup—[1-4] Routing
To Next Page
Loading...
