Panasonic KX-NS1000 - Router Configuration-Setup-[1-6] MAC Address

27.6 Router Configuration—Setup—[1-6] MAC
Address
MAC Address Clone
Selects whether to clone the MAC address of your PC
’s network adaptor onto this router.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
27.6 Router Configuration—Setup—[1-6] MAC Address
MAC Address (xx:xx:xx:xx:xx:xx)
Specifies the MAC address of your PC’
s network adaptor.
After specifying the MAC address, you must restart the PBX. It is recommended to use the System Reset
command of the PBX.
If Disable is selected for
MAC Address Clone, this item is grayed out.
Default
Not stored
Value Range
00:00:00:00:00:00–
FF:FF:FF:FF:FF:FF
Maintenance Console Location
27.6 Router Configuration—Setup—[1-6] MAC Address
PC Programming Manual References
5.4 System Control—System Reset
1132 PC Programming Manual Document Version 2016-03
27.6 Router Configuration—Setup—[1-6] MAC Address