7.1.2 Utility—Diagnosis—Ping
Performs a connection test on network devices. This function sends echo requests to a particular IP address
across an IP network, and displays the result of responses and round
-trip time.
This screen can be accessed only in On-line mode.
To perform a Ping test
1. Enter a specific IP address in the IP Address box.
2. Click Test to perform the test.
The result will be displayed.
3. Select an option:
• Click Capture if you want to save the displayed information.
1. Enter a file name, or select a file to overwrite.
2. Click Save.
• Click Cancel to return to the Ping screen.
Document Version 2016-03 PC Programming Manual 117
7.1.2 Utility—Diagnosis—Ping
To Next Page
Loading...
