Panasonic KX-NS1000 - Page 1179

Value Range
1–32
Maintenance Console Location
27.12 Router Configuration
—QoS Settings—[4] QoS Service
WAN QoS—Priority Settings
Specifies whether to enable priority queue numbers.
Default
Off
Value Range
On, Off
Maintenance Console Location
27.12 Router Configuration
—QoS Settings—[4] QoS Service
WAN QoS—Priority Settings—Priority Queue No.
Selects which queue number is prioritized.
If Enable is not checked as WAN QoS—Priority Settings, this item is grayed out.
Default
0
Value Range
0–3
Maintenance Console Location
27.12 Router Configuration
—QoS Settings—[4] QoS Service
WAN QoS—Protocol No.
Selects the method of specifying protocols for which QoS is applied.
If ANY is selected for Protocol No., QoS is available for all protocols.
If Select Protocol is selected for Protocol No., specify the protocol type for Select Protocol below.
If Other ( 0 - 255 ) is selected for Protocol No., specify the protocol number for Other ( 0 - 255 ) below.
Default
ANY
Value Range
ANY, Select Protocol, Other ( 0 - 255 )
Document Version 2016-03 PC Programming Manual 1179
27.12 Router Configuration—QoS Settings—[4] QoS Service