Panasonic KX-NS1000 - Utility-Monitor;Trace-CS Status Monitor-Air Sync Group

7.4.4 Utility—Monitor/Trace—CS
Status Monitor—Air Sync Group
This utility monitors the status of CSs being synchronized with air synchronization. CSs receive data from other
CSs that they are currently synchronized with. Current Sync CS information is displayed for IP-CSs that are
in INS status.
This option is only available at Installer level in On-line mode.
The displayed items for the Current Sync CS of each CS are as follows:
Item Description
CS Type Type of CS that each CS is currently synchronized with.
Shelf The shelf number (or Virtual
for IP-CSs) of the CS that each CS is currently
synchronized with.
Slot Slot number of the CS that each CS is currently synchronized with.
Port Port number of the CS that each CS is currently synchronized with.
CS / Repeater Indicates whether the CS that each CS is currently synchronized with is a
CS or Repeater.
CS Name Name of the CS that each CS is currently synchronized with.
CS ID 12-digit ID number of the CS that each CS is currently synchronized with.
Monitored Value Monitored value (dBm) of the CS that each CS is currently synchronized
with.
Monitored Level Monitored level (signal strength level) of the CS that each CS is currently
synchronized with.
Error Rate Error Rate (%)
of the CS for each CS that it is currently synchronized with.
To monitor the status of CSs
1. From the Air Synchronization Group Number drop-down list, select the desired Air Synchronization
Group number.
2. From the Interval Timer drop-down list, select the number of seconds between each automatic screen
refresh.
3. Click Start to monitor the status of air synchronization.
Monitoring will be performed and the screen will refresh according to the specified interval.
4. Click Stop to end monitoring.
5. To refresh the screen manually at any time, click Refresh.
6. To collect the monitored data, click Start Capture.
7. Click Stop Capture to finish and save the monitored data.
A dialog box will be displayed.
8. Navigate to the folder in which you want to save the file.
9. Enter a file name.
10. Click Save.
The dialog box will close.
Document Version 2016-03 PC Programming Manual 133
7.4.4 Utility—Monitor/Trace—CS Status Monitor—Air Sync Group