Value Range
Card type. Available cards vary by the model of the legacy gateway.
Maintenance Console Location
9.2 PBX Configuration—[1-1] Configuration
—Slot—Summary
PC Programming Manual References
9.1 PBX Configuration—[1-1] Configuration—Slot
Installation Manual References
Equipment Compatibility for Legacy Gateways
Status
Indicates the card status (reference only).
Default
Current status
Value Range
INS: The card is in service.
OUS: The card is out of service.
Fault: The card is not communicating with the network.
Pre-Install: A card has been added to the slot.
Maintenance Console Location
9.2 PBX Configuration—[1-1] Configuration
—Slot—Summary
PC Programming Manual References
9.1 PBX Configuration—[1-1] Configuration—Slot
Version
Indicates the software version of the installed card
(reference only).
Default
Current version
Value Range
Version number
Maintenance Console Location
9.2 PBX Configuration—[1-1] Configuration—Slot—Summary
Document Version 2016-03 PC Programming Manual 211
9.2 PBX Configuration—[1-1] Configuration—Slot—Summary
To Next Page
Loading...
