1.2.2 PC Programming Using Off-line Mode
PC
Programming is performed by connecting to the PBX using Web Maintenance Console, which is also known
as On-line mode. However, as certain programming requires installed cards to be set to out of service (OUS),
or requires system settings to be changed, some programming cannot be performed while the PBX is in use.
Off-line mode programming is performed using the Off-line version of Web Maintenance Console, which you
install on your PC.
Off-line mode allows you to create new system data files and make modifications to system data files stored
on your PC, without being connected to the PBX. The programming changes can be saved and then later
uploaded to the PBX.
The following procedures outline how to install and use the Off-line Web Maintenance Console for Off-line
mode programming.
Installation
Note
• Be sure to install and use the latest version of "Off-line WEB-Maintenance Console".
• Before beginning the installation of Off-line Web Maintenance Console, the following software must be
installed on the PC:
– Microsoft .NET Framework 2.0
– Microsoft .NET Framework 4
This software can be downloaded from Microsoft’s online Download Center.
• To install or uninstall the software on a PC running Windows Vista Business, Windows 7, Windows 8,
Windows 8 Professional, Windows 8.1, or Windows 8.1 Professional, you must be logged in as a user
in the "Administrators" group.
1. Copy the "Off-line WEB-Maintenance Console" setup file to your PC.
2. Double-click the setup file to run the installer.
3. Follow the on-screen instructions provided by the installation wizard.
The Program Launcher
After Off-line Web Maintenance Console has been installed, you can run the Program Launcher from the
Windows Start menu.
Document Version 2016-03 PC Programming Manual 23
1.2.2 PC Programming Using Off-line Mode
To Next Page
Loading...
