Panasonic KX-NS1000 - Page 274

NLP Setting
Specifies the NLP (Non
-Linear Processor) setting to control echo sound quality.
Default
Weak
Value Range
Disable, Weak, Normal, Strong
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
DSP Conference
DSP Conference Priority
Specifies the Conference Priority
(the conference resource you want to use).
Default
Preferential
Value Range
Preferential: Conference resources on the DSP card are used.
Alternative: Default conference resources are used.
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
DSP Digital Gain (Up) on V-IPEXT side for conference
Specifies
the DSP Digital Gain for the up voice path for conference calls using an extension of a V-IPEXT card.
Default
-2 dB
Value Range
-14–6 dB
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
DSP Digital Gain (Up) on V-SIPEXT side for conference
Specifies the DSP Digital Gain for the up voice path for conference calls using an extension of a V
-SIPEXT
card.
Default
-2 dB
274 PC Programming Manual Document Version 2016-03
9.5.1 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main