Panasonic KX-NS1000 - Page 281

Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
CNG Signal Effective Detection Width 2 (OFF)
Specifies the length of time that the PBX waits until another CNG signal is detected.
Default
3000 ms
Value Range
20–5000 ms
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration
—Slot—Site Property
CNG Signal Fixation Detection Counter
Specifies the number of times the CNG signal must be detected before the PBX proceeds the fax operation.
Default
2
Value Range
1–3
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration
—Slot—Site Property
CNG Signal Fixation Detection Pattern
Specifies the CNG signal pattern to be detected before the PBX proceeds the fax operation.
Default
ON
Value Range
OFF, ON
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration
—Slot—Site Property
Maximum Silence Time
Specifies the length of time of silence that the PBX will detect as the end of a call.
Default
60000 ms
Document Version 2016-03 PC Programming Manual 281
9.5.3 PBX Configuration—[1-1] Configuration—Slot—Site Property—NSVM