Stand-alone and Other Networking Configurations
A KX-NS1000 PBX can be used as a single stand-alone unit, without connecting to other KX-NS1000 PBXs
in a One-look network. Programming is still performed by logging in to the PBX using Web Maintenance
Console. A KX-NS1000 PBX (including the Master unit of a One-look network) can also connect to other PBXs
using standards such as H.323. For details about other networking configurations, refer to 14.1.5 One-look
Network—IP Network Type Comparison in the Feature Manual.
30 PC Programming Manual Document Version 2016-03
1.2.3 PBX Configuration Types
To Next Page
Loading...
