Value Range
Max. 20 digits (consisting of 0–
9, *, and #)
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
Anonymous format in "From" header
Specifies the format of the "From" header when not sending caller ID.
Default
Display name and SIP
-URI
Value Range
Display name and SIP-URI, Display name only
Note
If "Display name and SIP-URI" is selected, the display name part and the SIP
-URI of the "From" header
will be displayed as "Anonymous".
[Example]
From: Anonymous <sip:anonymous@anonymous.invalid>
If "Display name only" is selected, only the display name part of the "From" header will be displayed as
"Anonymous".
[Example]
From: Anonymous <sip:1234@example.com>
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
P-Asserted-Identity header
Select whether to include a P
-Asserted-Identity header with caller information. This header will be sent
independent of the selection for
Header Type (From Header/P-Preferred
-Identity Header).
Default
Disable
Value Range
Disable
Enable
Note
• To copy values from one location to another, click Copy to.
• If the Channel Attribute setting of the port is "Additional", the setting cannot be changed.
Maintenance Console Location
9.11 PBX Configuration
—[1-1] Configuration—Slot—V-SIPGW—Port Property
Document Version 2016-03 PC Programming Manual 315
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
To Next Page
Loading...
