Panasonic KX-NS1000 - Page 421

Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
9.21 PBX Configuration
—[1-1] Configuration—Slot—V-UTEXT32—Port Property
Phone Location
Specifies the type of extension connected to the port.
Default
Local
Value Range
Local: The extension is located on the same network as the PBX
(standard configuration).
Remote (SBC): The extension is accessing the PBX remotely (Simple Remote Connection).
Remote (MRG): The extension is accessing the PBX remotely (use Media Relay Gateway).
Maintenance Console Location
9.21 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT32—Port Property
Feature Manual References
18.1.1 Simple Remote Connection
Web-MC Ability
Specifies
whether the Web programming is allowed on the KX-UT series SIP phone connected to the port by
enabling the Web port setting on the phone’s menu. For details about Web programming for KX-UT series SIP
phones, refer to the documentation of the phone.
Default
Enable
Value Range
Enable, Disable
Maintenance Console Location
9.21 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT32—Port Property
Feature Manual References
18.1.1 Simple Remote Connection
Document Version 2016-03 PC Programming Manual 421
9.21 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT32—Port Property