Panasonic KX-NS1000 - Page 425

Default
112 ms
Value Range
8 ´ n (n=3–63) ms
Maintenance Console Location
9.22 PBX Configuration—[1-1] Configuration—Slot— SLC2 - Card Property
Flash Timing - Range
Specifies
the maximum length that a signal sent from an SLT can be for the PBX to recognize it as a hookswitch
flash signal.
Default
904 ms
Value Range
8 ´ n (n=3–191) ms
Maintenance Console Location
9.22 PBX Configuration—[1-1] Configuration—Slot— SLC2 - Card Property
DTMF-R STD Detection Time
Specifies the minimum length that a DTMF tone must be for the PBX to recognize it as a DTMF tone.
Default
30 ms
Value Range
2 ´ n (n=1–31) ms
Maintenance Console Location
9.22 PBX Configuration
—[1-1] Configuration—Slot— SLC2 - Card Property
Hook Threshold PD A-law
Specifies
the current threshold (A-law) for switching from Power Save mode to an active state. Please consult
your certified Panasonic dealer for more information.
Default
Not stored
Value Range
1.5–4.0 mA
Document Version 2016-03 PC Programming Manual 425
9.22 PBX Configuration—[1-1] Configuration—Slot— SLC2 - Card Property