Panasonic KX-NS1000 - Page 439

Maintenance Console Location
9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port
Caller ID Detection
Enables the PBX to detect a Caller ID signal from the analog CO line.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
9.25 PBX Configuration
—[1-1] Configuration—Slot—Port Property - LCO Port
Programming Manual References
9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Feature Manual References
4.1.3 Caller ID
Pause Time
Specifies the length of a pause.
Default
1.5 s
Value Range
1.5 s, 2.5 s, 3.5 s,
4.5 s
Maintenance Console Location
9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port
Feature Manual References
15.1.2 Pause Insertion
9.1.5 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
18.1.8 Special Carrier Access Code
Flash Time
Specifies the length of a flash signal.
Default
608 ms
Document Version 2016-03 PC Programming Manual 439
9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port