Panasonic KX-NS1000 - Page 570

Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
10.7.1 PBX Configuration—[2-7-1] System—Class of Service
—COS Settings
Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main— COS
12.2.1 PBX Configuration—[4-2-1] Extension
—Portable Station—Extension Settings—Main—
COS
13.3.2 PBX Configuration—[5-3-2] Optional Device
—Voice Message—DISA Message
Feature Manual References
5.1.10 DISA (Direct Inward System Access)
Remote Operation by Other Extension
Allows
the Walking COS feature to be used from a remote location (inside the PBX, or outside the PBX using
DISA).
Default
Allow
Value Range
Allow, Deny
Maintenance Console Location
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main—
COS
12.2.1 PBX Configuration—[4-2-1] Extension
—Portable Station—Extension Settings—Main—
COS
Feature Manual References
22.1.1 Walking COS
Accept Wireless XDP Parallel Mode Set by PS
Allows Wireless XDP Parallel Mode to be set by a PS.
Default
Allow
570 PC Programming Manual Document Version 2016-03
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings