Panasonic KX-NS1000 - PBX Configuration-[2-8-2] System-Ring Tone Patterns-Call from DOORPHONE

10.8.2 PBX Configuration—[2-8-2] System—Ring Tone
Patterns—Call from DOORPHONE
Different ring tone patterns can be selected for incoming doorphone calls depending on the doorphone port
that
the calls originate from. A maximum of 8 Ring Tone Pattern Tables can be programmed, and any pattern
table can be selected for use by an extension.
Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for incoming doorphone calls.
Default
Triple
Value Range
Single, Double
, Triple, S-Double, Option 1, Option 2
Maintenance Console Location
10.8.2 PBX Configuration—[2-8-2] System—Ring Tone Patterns—Call from DOORPHONE
Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 1—
Ring
Pattern Table
12.2.1 PBX Configuration—[4-2-1] Extension
—Portable Station—Extension Settings—Option 1—
Ring
Pattern Table
13.1 PBX Configuration
—[5-1] Optional Device—Doorphone
Feature Manual References
17.1.2 Ring Tone Pattern Selection
5.1.15 Doorphone Call
Document Version 2016-03 PC Programming Manual 577
10.8.2 PBX Configuration—[2-8-2] System—Ring Tone Patterns—Call from DOORPHONE