Feature Manual References
15.1.1 Paging
PT Fwd / DND—Extension Status of Mobile Integration (FWD NA to CO)
Specifies whether an extension is shown as idle or busy when it forwards a call to a CO line on no answer.
Default
Idle
Value Range
Idle, Busy
Maintenance Console Location
10.9 PBX Configuration
—[2-9] System—System Options
Programming Manual References
12.1.2 PBX Configuration—[4-1-2] Extension—Wired Extension—FWD/DND
12.2.2 PBX Configuration—[4-2-2] Extension—Portable Station—FWD/DND
Feature Manual References
7.1.6 FWD (Call Forwarding)
PT Operation—Off Hook Monitor
Enables the use of Off-Hook Monitor with DPTs and IP-PTs.
Default
Enable
Value Range
Disable: The PT user’s voice is sent through the handsfree microphone. The other party
’s voice is heard
through the hands-free speaker.
Enable: The PT user’s voice is sent through the handset microphone. The other party’s voice is heard through
both the hands-free speaker and the handset.
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Manual References
14.1.1 Off-hook Monitor
PT Operation—Privacy Release by SCO key
Selects the function of the S-CO button during a CO line call.
584 PC Programming Manual Document Version 2016-03
10.9 PBX Configuration—[2-9] System—System Options
To Next Page
Loading...
