Panasonic KX-NS1000 - Page 597

Value Range
On or Flash, Off
Maintenance Console Location
10.9 PBX Configuration
—[2-9] System—System Options
Feature Manual References
4.1.8 Call Pickup
12.1.1 LED Indication
DSS Key—Call Pick-up by DSS key for Direct Incoming Call
Specifies whether a DSS button will light up or flash when a call rings at the specified extension. To enable
this setting, DSS Key—DSS key mode for Incoming Call on this screen must be set to "ON or Flash".
Default
Enable
Value Range
Disable: The DSS button will light up when a call arrives, but pressing it will not pick up the call.
Enable: The DSS button will flash when a call arrives, and pressing it will pick up the call.
Maintenance Console Location
10.9 PBX Configuration
—[2-9] System—System Options
Feature Manual References
4.1.8 Call Pickup
DSS Key—Call Pick-up by DSS key for ICD Group Call
Specifies
whether a DSS button will light up or flash when a call rings at the specified incoming call distribution
group.
To enable this setting,
DSS Key—DSS
key mode for Incoming Call on this screen must be set to "ON or
Flash".
Default
Disable
Value Range
Disable: The DSS button will light up when a call arrives, but pressing it will not pick up the call.
Enable: The DSS button will flash when a call arrives, and pressing it will pick up the call.
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Document Version 2016-03 PC Programming Manual 597
10.9 PBX Configuration—[2-9] System—System Options