10.11 PBX Configuration—[2-11] System—Audio
Gain
10.11.1 PBX Configuration—[2-11-1] System—Audio
Gain—Paging/MOH
Gain levels for the External Pager/External BGM ports can be programmed.
PBX Model
Selects the PBX model that performs paging/MOH gain settings.
Settings that cannot be performed by the selected PBX model will be grayed out. The gain values of those
settings will be the same for the whole system. Therefore, when operating in a One
-look network, if different
PBX models are registered as Slave units, the corresponding common values are used.
Default
KX-NS1000
Value Range
KX-NS1000, KX-NS700, KX-NS500, KX-NS300
Maintenance Console Location
10.11.1 PBX Configuration—[2-11-1] System—Audio Gain—Paging/MOH
Programming Manual References
11.4 PBX Configuration—[3-4] Group—Paging Group
Feature Manual References
14.1.4 One-look Network
15.1.1 Paging
Paging—EPG 1–6 (External Pager 1–6)
Specifies the paging volume for External Pager port.
EPG numbers that cannot be set according to the model selected in PBX Model will be grayed out.
Default
3 dB
Value Range
-15.5–15.5 dB
Maintenance Console Location
10.11.1 PBX Configuration
—[2-11-1] System—Audio Gain—Paging/MOH
618 PC Programming Manual Document Version 2016-03
10.11.1 PBX Configuration—[2-11-1] System—Audio Gain—Paging/MOH
To Next Page
Loading...
