Panasonic KX-NS1000 - PBX Configuration-[3-1] Group-Trunk Group; PBX Configuration-[3-1-1] Group-Trunk Group-TRG Settings

11.1 PBX Configuration—[3-1] Group—Trunk Group
11.1.1 PBX Configuration—[3-1-1] Group
—Trunk Group—TRG
Settings
CO lines can be organized into trunk groups. The settings of a trunk group are applied to all CO lines in the
group. A maximum of 96 trunk groups can be programmed.
For more information on trunk groups, see "8.1.1 GROUP FEATURES" in the Feature Manual.
Main
Group Name
Specifies the name of the trunk group for programming reference.
Default
Not stored
Value Range
Max. 20 characters
Maintenance Console Location
11.1.1 PBX Configuration—[3-1-1] Group
—Trunk Group—TRG Settings
Programming Manual References
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings
COS
Specifies the COS of the trunk group, applied when making a call from a CO line to another CO line with TIE
Line Service.
If you wish to prevent such calls from being made, ensure that the COS specified here has a TRS level of
"7" assigned for all relevant time modes in 10.7.1 PBX Configuration—[2-7-1] System—Class of
Service—COS Settings.
Default
7
Value Range
1–512
Maintenance Console Location
11.1.1 PBX Configuration—[3-1-1] Group
—Trunk Group—TRG Settings
Programming Manual References
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings
624 PC Programming Manual Document Version 2016-03
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings