Panasonic KX-NS1000 - Page 730

Option 8
Extension Number
Specifies the extension number of the extension.
Default
Starting at 101
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension
—Wired Extension—Extension Settings
Extension Name
Specifies the name of the extension.
Default
Not stored
Value Range
Max. 20 characters
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension
—Wired Extension—Extension Settings
Group CW w/o Tone (Ring after Call)
Enables an incoming call to an incoming call distribution group to arrive at a previously busy extension at the
moment that the extension goes on
-hook for the previous call.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Extension Caller ID Sending
Enables the extension to send Caller ID information to an SLT.
Default
Enable
730 PC Programming Manual Document Version 2016-03
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings