5.1 System Control—Program Update
The program files for the following hardware components can be updated with the
Program Update feature.
Each file must be named as indicated in the table to be recognized by the KX-NS1000.
Hardware that can be updated using Program Update
Program Type Target of Update File Name
MPR Program KX-NS1000 Mother Board PCMPR
LPR Programs CSIF PCSINF
DHLC/DLC PDHLC
SLC PSLC
T1 PT1
PRI23 PPRI23
OPB3 POPB3
ESLC16/EMSLC16 PESLC
ECSLC24/EMSLC24/MCSLC16/MCSLC24 PEESLC
ELCOT PELCOT
ECHO PECHO
CSLC16 PCSLC
STACK-S PSTKS
PT Programs KX-NT265 PNT265A
KX-NT343, KX-NT346, KX-NT343 PNT300
KX-NT321 PNT321
KX-UT133, KX-UT136 PUT13X
KX-UT113, KX-UT123 PUT1XX
KX-NT543, KX-NT546 PNT540
KX-NT551, KX-NT553, KX-NT556 PNT550
KX-NT560 PNT560
KX-UT248 PUT248
KX-UT670 PUT670
76 PC Programming Manual Document Version 2016-03
5.1 System Control—Program Update
To Next Page
Loading...
